Replacement Parts That Keep Compactor Systems Moving
Arrow Compactor supplies, fabricates and installs replacement parts for interior and exterior compactors, refuse chutes, hopper doors, dumpsters and related waste-handling equipment.
From hydraulic cylinders, motors and pumps to complete power units, custom hoses and fabricated supports, our experienced team helps housing authorities, property managers, building owners and general contractors maintain safe, dependable equipment.
Whether you know the exact part you need or require help diagnosing an equipment problem, Arrow can inspect the system and recommend a practical solution.
High-Quality Construction and Engineering
Interior compactors must withstand frequent daily use while operating safely within limited building space. The Arrow Compactor combines heavy-duty steel construction, a powerful hydraulic system and automatic controls to support reliable waste handling in active residential properties.
Designed with property teams and maintenance personnel in mind, the unit is easy to operate, fits into small areas and includes instructions in both English and Spanish.

Parts and Components Include
- Hydraulic cylinders
- Motors
- Pumps
- Complete power units
- Hopper doors
- Hydraulic hoses and fittings
- Bag holders
- Compactor legs and supports
- Fabricated replacement parts
- White-label products

Hydraulic Cylinders
Restore the Force Behind the Compaction Cycle
Hydraulic cylinders provide the force that moves the ram and completes each compaction cycle. Worn seals, damaged rods, leaks or internal cylinder problems can reduce performance and eventually cause equipment failure.
Arrow can inspect the cylinder and hydraulic system to determine whether repair or replacement is the most practical solution.
Signs of a Cylinder Problem
- Visible hydraulic fluid leaks
- Reduced compaction force
- Slow or uneven ram movement
- Incomplete compaction cycles
- Unusual equipment movement
- Difficulty maintaining system pressure
- Frequent shutdowns
Cylinder Services
- Cylinder inspection
- Leak diagnosis
- Cylinder removal and replacement
- Seal and component evaluation
- Hydraulic hose replacement
- System testing
- Preventative maintenance
Motors
Dependable Power for Compactor Operation
The motor drives the hydraulic pump and is essential to the operation of the compactor power unit. Electrical problems, overheating, unusual noise or declining performance may indicate that a motor requires repair or replacement.
Arrow supplies and installs replacement motors for interior and exterior compactor systems.
The Arrow Compactor is designed with a 3 HP, 208-220V, three-phase motor. Requirements for other systems vary according to the equipment and application.

Motor Support Includes
- Motor inspection
- Electrical and operational evaluation
- Replacement motor selection
- Motor removal and installation
- Power-unit testing
- Control-system checks
- Preventative maintenance recommendations

Hydraulic Pumps
Maintain Consistent Pressure and Compactor Performance
A hydraulic pump moves fluid through the system and supplies the pressure needed for compactor operation. Pump wear or damage can cause reduced pressure, slow cycles, excessive noise and declining equipment performance.
Arrow can evaluate the pump and related hydraulic components to determine whether the issue can be corrected through repair or requires replacement.
Pump Services
- Hydraulic pump inspection
- Pressure and performance evaluation
- Leak identification
- Pump replacement
- Motor and pump alignment
- Hose and fitting replacement
- Power-unit testing
- Hydraulic system troubleshooting
Complete Power Units
Integrated Hydraulic Power for Interior Compactors
Arrow supplies and installs complete power units for interior compactors and related waste-handling systems.
A complete power-unit replacement may provide a practical solution when multiple hydraulic or electrical components are aging, damaged or no longer dependable.

Power-Unit Components May Include
- Electric motor
- Hydraulic pump
- Fluid reservoir
- Valves
- Controls
- Hydraulic hoses
- Fittings
- Filters
- Safety switches
- Supporting framework
Power-Unit Services
- Existing unit inspection
- Replacement recommendations
- Power-unit fabrication and assembly
- Removal of the existing unit
- Installation and connection
- Electrical and hydraulic coordination
- System startup and testing
- Ongoing repair and maintenance
Hopper Doors
Safe, Reliable Access to Refuse Chute Systems
Hopper doors are an important part of a building’s refuse-disposal system. Damaged doors, worn hardware or poor alignment can make the equipment difficult to operate and may create safety, odor or sanitation concerns.
Arrow installs, repairs and replaces hopper doors in high-rise apartment buildings, housing authority developments and multifamily properties.
Hopper Door Parts and Services
- Complete replacement doors
- Hinges
- Latches and handles
- Door closers
- Frames and supports
- Hardware replacement
- Door alignment
- Welding repair
- Custom-fabricated components
- Safety-related upgrades

Hydraulic Hoses and Fittings
Custom-Fabricated Hoses for Compactor Systems
A damaged hydraulic hose can cause fluid loss, reduced system pressure, equipment failure and unplanned downtime.
Arrow fabricates replacement hydraulic hoses for compactors and related equipment. Our team can identify the required hose length, pressure rating and fitting configuration, then fabricate and install an appropriate replacement.
Hydraulic Hose Services
- Custom hose fabrication
- Emergency hose replacement
- Fitting replacement
- Leak identification
- Hose routing evaluation
- Preventative hose inspection
- Hydraulic system testing
- Multi-hose replacement programs
Bag Holders
Practical Components for Interior Waste Systems
Bag holders help support organized waste collection around interior compactors and refuse-handling areas.
Arrow manufactures and supplies replacement bag holders for existing systems and new compactor installations. Components can be produced to match standard equipment or customized for the building’s layout and operating requirements.

Bag Holder Capabilities
- Standard replacement bag holders
- Custom sizes and configurations
- Wall-mounted or equipment-mounted designs
- Structural repair
- Welding and fabrication
- Repeat production
- White-label manufacturing
Fabricated Support Components
- Adjustable compactor legs
- Fixed equipment legs
- Support frames
- Mounting brackets
- Structural reinforcements
- Equipment stands
- Container supports
- Custom-fabricated assemblies
Compactor Legs and Supports
Stable Equipment Support Built for the Installation
Compactor legs, frames and supports help position and stabilize equipment within the waste-handling area.
Arrow manufactures replacement legs and supporting components for interior compactors, containers and related equipment. Custom fabrication is available when existing conditions require specialized dimensions or configurations.
Custom Parts and Components
In-House Fabrication for Specialized Equipment Needs
Replacement parts for older or customized waste-handling equipment may not always be readily available. Arrow’s in-house welding and fabrication capabilities allow us to create select components based on the existing equipment or project requirements.
Arrow can inspect the equipment, review available measurements and determine whether a custom-fabricated component offers a practical solution.
Custom Fabrication Capabilities
- Replacement panels
- Brackets and mounting hardware
- Structural supports
- Chute and hopper door components
- Dumpster and container parts
- Equipment legs
- Bag holders
- Compactor components
- Application-specific metalwork
White-Label Products
Manufacturing Support for Dealers and Equipment Providers
Arrow provides white-label manufacturing for equipment dealers, contractors and waste-handling companies that need products or components supplied under their own brand.
Our in-house manufacturing and fabrication capabilities can support individual custom projects, repeat orders and high-volume production.
White-Label Capabilities
- Compactor parts and components
- Bag holders
- Equipment legs and supports
- Hydraulic assemblies
- Power units
- Dumpsters and containers
- Brackets and structural components
- Custom-fabricated metal products
- Repeat production
- Products manufactured to supplied specifications
Installation Support
- Equipment inspection
- Component identification
- Replacement-part sourcing or fabrication
- Existing-part removal
- Professional installation
- Electrical or hydraulic connection
- Equipment adjustment
- Startup and operational testing
- Maintenance recommendations
Professional Parts Installation
Supplied, Installed and Tested by One Team
Arrow provides more than replacement-part supply. Our technicians can install the new component, make required adjustments and test the equipment for proper operation.
Professional installation helps ensure that the part is compatible with the system and that related equipment issues are identified before the compactor returns to service.
Emergency Parts and Repair Support
Responsive Assistance When Equipment Goes Down
A failed cylinder, motor, pump or hydraulic hose can quickly take a compactor out of operation.
Arrow provides responsive field service to identify the problem and determine what is needed to restore equipment performance. When the required component is available or can be fabricated quickly, our team works to reduce downtime and return the system to service.
Preventative Parts Replacement
Address Wear Before It Causes a Breakdown
Regular inspections can identify worn hoses, leaking cylinders, declining motors and other developing issues before they cause unexpected equipment failure.
Arrow can incorporate parts inspection and planned component replacement into a preventative maintenance program or monthly service agreement.

Preventative Maintenance Checks May Include
- Hydraulic hose condition
- Cylinder seals and operation
- Motor performance
- Pump pressure
- Fluid condition and leaks
- Power-unit controls
- Safety switches
- Hopper door hardware
- Compactor supports
- Structural components
Why Choose Arrow for Compactor Parts?
The Arrow Difference
- 01 More than 40 years of waste-equipment experience
- 02 Over 100 years of combined shop experience
- 03 In-house manufacturing and fabrication
- 04 Direct experience with interior and exterior compactors
- 05 Custom hydraulic hose fabrication
- 06 Professional parts installation
- 07 Welding and structural repair
- 08 Custom and hard-to-find component solutions
- 09 Emergency repair capabilities
- 10 Preventative maintenance programs
- 11 White-label manufacturing
- 12 Regional field service
Serving New York City and the Northeast
Arrow supplies, fabricates and installs compactor parts throughout New York, New Jersey, Pennsylvania, Connecticut and the surrounding Northeast.
Our primary service area includes New York City’s five boroughs, Long Island, Jersey City, Hoboken, northern and central New Jersey, Philadelphia and southern Connecticut.
















